Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

Chapter 1: Introduction 1-2 Chipset Overview The Intel G45/G43 Express Chipset is specially designed for use with Intel Core™ 2 Extreme/Core Quad/Core Duo LGA 775 processors. It consists of two primary com- ponents: the Graphics and Memory Controller Hub (GMCH), and the I/O Controller Hub (ICH10). The GMCH manages the data flow between the CPU interface, the System Memory interface, the External Graphics interface (or PCI-Express Inter- face), and the I/O Controller through the Direct Media Interface (DMI). The ICH10 provides a multitude of I/O related functions. Utilizing a single LGA 775 socket processor, the G45/G43 GMCH supports an FSB frequency of 1333/1066/800 MHz.

Host-initiated I/O cycles are decoded to the PCI-Express, the DMI, or the GMCH configuration space. Host-initiated memory cycles are decoded to PCI-Express, DMI or system memory. Memory accesses initiated from PCI-Express will be snooped on the host bus between DMI to sys- tem SDRAM. The GMCH supports one or two channels of DDR3 controller with a maximum of two DIMMs per channel. Graphics and Memory Controller Hub (GMCH) Direct Media Interface (DMI) Providing the high-speed, chip-to-chip connection between the GMCH and ICH10 is the Direct Media Interface (DMI).

The DMI integrates advanced priority-based servicing, allowing for concurrent traffic, true isochronous transfer capabilities and permitting current as well as legacy software to work normally. The Intel I/O Controller Hub (ICH10) supports a variety of I/O related functions and PCI devices, including the following: DMI-to PCI Bridge LPC Controller SATA Controllers #1 and #2 Thermal Subsystem SMBus Controller Six FS/LS USB UHCI Controllers Intel ICH10 System Features Two HS USB EHCI Controllers 1-9