Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

C2SEA/C2SEE User's Manual 2-2 Motherboard Installation All motherboards have standard mounting holes to fit different types of chassis. Make sure that the locations of all the mounting holes for both motherboard and chassis match. Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly recommended because they ground the mother- board to the chassis. Make sure that the metal standoffs click in or are screwed in tightly. Then use a screwdriver to secure the motherboard onto the motherboard tray. Note : Some components are very close to the mounting holes.

Please take precautionary measures to prevent damage to these components when installing the motherboard to the chassis. Tools Needed Locations of Mounting Holes 4. Insert a Pan head #6 screw into a mounting hole on the motherboard and its matching mount- ing hole on the chassis, using a Philip screwdriver. 5. Repeat Step 4 to insert #6 screws to all mount- ing holes. 6. Make sure that the motherboard is securely placed on the chassis. Caution: To prevent damage to the motherboard or its components, please do not use a force greater than 8 lb/inch on each mounting screw when installing the motherboard. 2-2 1. Philip Screwdriver 2. Pan head #6 screws (9 pcs) Installation Instructions 1.

Locate the mounting holes on the motherboard. C2SEA/C2SEE Refer to the layout on the right for mounting hole locations. 2. Locate the matching mounting holes on the chassis. Align the mounting holes on the mother- board against the mounting holes on the chassis. 3. Place Standoffs on the chassis as needed. C2SEA/C2SEE