C2SEA/C2SEE User's Manual Possible System Memory Allocation & Availability System Device Size Physical Memory Remaining (-Available) (4 GB Total System Memory) Firmware Hub flash memory (System BIOS) 1 MB 3.99 Local APIC 4 KB 3.99 Area Reserved for the chipset 2 MB 3.99 I/O APIC (4 Kbytes) 4 KB 3.99 PCI Enumeration Area 1 256 MB 3.76 PCI Express (256 MB) 256 MB 3.51 PCI Enumeration Area 2 (if needed) -Aligned on 256-MB boundary- 512 MB 3.01 VGA Memory 16 MB 2.85 TSEG 1 MB 2.84 Memory available to OS and other ap- plications 2.84 Installing and Removing DIMMs To Install: Insert module vertically and press down until it snaps into place. Pay attention to the alignment notch at the bottom.
To Remove: Use your thumbs to gently push the release tabs near both ends of the module. This should release it from the slot. Top View of DDR3 Slot 2-8 DDR3 Notch Notch R Te ale base N so ht oe u: lN do atc lih R Te ale base gn with the receptive point on the slot C2SEA/C2SEE