Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

Chapter 2: Installation Reset Button The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset switch on the computer case. Refer to the table on the right for pin definitions. Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily con- tacting both pins will power on/off the sys- tem. This button can also be configured to function as a suspend button (with a setting in the BIOS - see Chapter 4). To turn off the power when set to suspend mode, press the button for at least 4 seconds. Refer to the table on the right for pin definitions. Note :

Do not close or short Pins 1 & 2 since this will cause the system to continuously reboot. KB/Mouse CPU Fan A. Reset VGA JPW2 Fan1 B.

PWR Button HDMI SPDIF_Out CPU USB2/3/4/5 JPUSB1 Fan5 DIMM1A DIMM1B DIMM2A DIMM2B DIMM4 JPW1 Power LED LED_Anode+ 15 16 LAN1 HD AUDIO USB/0/1 G45 (C2SEA) G43 (C2SEE) Intel DIMM1 DIMM2 DIMM3 HDD LED LED_Anode+ JPL1 Slot7 PCI-E x1 Slot6 PCI-E Gen2 x16 C2SEA/C2SEE Fan3 Fan2 NIC1 LED LED_Anode+ Intel Lan CTRL Slot5 PCI 33MHZ SPI BIOS CMOS CLEAR ICH10 LE1 JLED JF1 OH/Fan Fail LED X LED_Anode+ LED_Anode+ FP Audio JI2C1 JI2C2 Slot3 PCI 33MHz Slot4 PCI-E x4 on x16 Battery JPAC I-SATA4 I-SATA5 JWD I-SATA0 I-SATA1 JOH X X A S I/O CD1 SPKR1 Slot1 PCI 33MHz Slot2 PCI 33MHz JWOL JPD1 JPI1 JD1 CTRL IDE USB 10/11 USB 8/9 USB6 JPUSB2 I-SATA2 I-SATA3 Ground Reset Button B Printer COM1 JWOR Floopy 1394_1 1394_2 JL1 IDE USB7 Fan4 Ground Power Button 2-13 Reset Button Pin Definitions (JF1) Pin# Definition 3 Reset 4 Ground Power Button Pin Definitions (JF1) Pin# Definition 1 Signal 2 +3V Standby