Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

Chapter 2: Installation Fan Headers The C2SEA/C2SEE has five chassis fan headers (Fan 1 to Fan 5). Fan 1 is the CPU Fan. Fan 2 to Fan 5 are system/ chassis fans. Note : Pins 1-3 of a 4-pin fan headers are backward compatible with the tra- ditional 3-pin fans. See the table on the right for pin definitions. The onboard fan speeds are controlled by Thermal Management via BIOS Hardware Monitoring in the Advanced Setting. ( Note : Default: Disabled . When using Thermal Management settings, please use all 3-pin fans or all 4-pin fans on the motherboard.) VGA Connector A VGA connector is located next to the USB ports 2~5 on the IO backplane. Refer to the board layout below for the location. A.

Fan 1 (CPU Fan) VGA B. Fan 2 C. Fan 3 D. Fan 4 E. Fan 5 F.

VGA Slot1 PCI 33MHz JWOL JL1 CTRL USB 8/9 USB6 USB7 D Printer COM1 JWOR Floopy 1394_1 1394_2 IDE Fan4 2-17 Fan Header Pin Definitions (Fan1-3) Pin# Definition 1 Ground 2 +12V 3 Tachometer 4 PWR Modulation 2Mouse A JPKB W/ CPU Fan F Fan1 CPU HDMI SPDIF_Out DIMM1A DIMM1B USB/0/1USB2/3/4/5 E Fan5 Intel LAN1 JPUSB1 G45 (C2SEA) G43 (C2SEE) AUDIO DIMM1 DIMM2 HD Slot7 PCI-E x1 C2SEA/C2SEE JPL1 Slot6 PCI-E Gen2 x16 SPI BIOS CLTaRnL Slot5 PCI 33MHZ CMOS CLEAR Int IC FP Audio Slot4 PCI-E x4 on x16 Slot3 PCI 33MHz Battery JPAC JI2C1 JI2C2 JD1 S I/O CD1 Slot2 PCI 33MHz SPKR1JPD1 JPI1 IDE DIMM2A DIMM2B JPW1 DIMM3 DIMM4 B Fan2 LE1Fan3 C el JLED H10 JF1 JWD I-SATA0JOH I-SATA4 I-SATA1 I-SATA5 I-SATA2 USB 10/11 I-SATA3