Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

C2SEA/C2SEE User's Manual USB Wake-Up Use JPUSB jumpers to "wake-up" your system by pressing a key on a USB keyboard or by clicking the USB mouse of your system. The JPUSB jumpers are used together with the USB Wake-Up feature in the BIOS. Enable both the jumpers and the BIOS setting to allow the system to "wake-up via USB devices". See the table on the right for jumper settings and jumper connections. Note : JPUSB1 is for Back Panel USB ports #2~5, and JPUSB2 is for Front Panel USB ports #6, #7, #8~9 and #10~11.) The default jumper setting is set to Disabled .

However, when the "USB Wake-Up" function is en- abled in the BIOS, and the desired USB ports are enabled via the JPUSB jumper, please be sure to remove all USB devices from the USB ports whose USB jumpers are set to Disabled before the system goes into the standby mode. A. JPUSB1 B.

JPUSB2 VGA HDMI LAN1 Lan CTRL Slot1 PCI 33MHz JWOL CTRL USB 8/9 USB6 USB7 Printer COM1 JWOR Floopy 1394_1 1394_2 JL1 IDE Fan4 2-28 JPUSB1 (Back Panel USB Wake-up) Pin# Definition 1-2 Disabled (Default) 2-3 Enabled JPUSB2 (Front Panel USB Wake-up) Pin# Definition 1-2 Disabled (Default) 2-3 Enabled 2Mouse JPKB W/ CPU Fan Fan1 CPU DIMM1A DIMM1B USB/0/1USB2/3/4/5 FaAn5 Intel JPUSB1 G45 (C2SEA) G43 (C2SEE) AUDIO DIMM1 DIMM2 HD Slot7 PCI-E x1 C2SEA/C2SEE JPL1 Slot6 PCI-E Gen2 x16 SPI BIOS Slot5 PCI 33MHZ CMOS CLEAR Int IC P Audio Slot4 PCI-E x4 on x16 Slot3 PCI 33MHz Battery JPAC JI2C1 JI2C2 JD1 I/O CD1 Slot2 PCI 33MHz SPKR1JPD1 JPI1 IDE DIMM2A DIMM2B JPW1 DIMM3 DIMM4 Fan2 LE1Fan3 el JLED H10 JF1 JWD I-SATA0JOH I-SATA4 I-SATA1 I-SATA5 I-SATA2 USB 10/11 I-SATA3