C2SEA/C2SEE User’s Manual This feature allows the user to determine how TV-Standard is handled by the system. The options are VBIOS-Default , NTSC, PAL, SECAM, SMPTE 240M, ITU-R-Television, SMPTE 295M, SMPTE 296M, EIA-770.2, and EIA-770.3. TV Standard If Enabled, the BIOS will monitor the level of Electromagnetic Interference caused by the components and will attempt to decrease the interference when- ever needed. The options are Enabled and Disabled . Spread Spectrum Clock HDA Controller Select Enabled to enable the High-Definition Audio Controller. The options are Enabled and Disabled.
Intel VT-d Select Enabled to enable Intel's Virtualization Technology support for Direct I/O VT-d by reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature offers fully-protected I/O resource-sharing across the Intel platforms, providing the user with greater reliability, security and availability in networking and data-sharing. The settings are Enabled and Disabled . Active State Power Management Select Enabled to enable Active-State Power Management for signal transactions between L0 and L1 Links on the PCI Express Bus in order to maximize power- saving and transaction speeds. The options are Enabled and Disabled .
USB Functions This feature allows the user to decide the number of onboard USB ports to be en- abled. The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8 USB ports, 10 USB ports, and 12 USB ports. USB Port Configuration This feature allows the user to configure the USB port settings. The options are 6 x 6 and 8 x 4. USB2.0 Controller Select Enabled to activate the onboard USB2.0 controller. The options are En- abled and Disabled. Note: This function is not available if USB Functions above is set to more than 8 USB ports. 4-10