Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

C2SEA/C2SEE User’s Manual The Default Alarm : Select this setting if you want the CPU overheat alarm (including the LED and the buzzer) to be triggered when the CPU temperature reaches about 5 o C above the threshold temperature as predefined by the CPU manufacturer to give the CPU and system fans additional time needed for CPU and system cooling. CPU Temperature, System Temperature Fan Speed Control Modes This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the fan speed are correlative. When the CPU on-die temperature increases, the fan speed will also increase, and vice versa.

Select Workstation if your system is used as a Workstation. Select Server if your system is used as a Server. Select Disabled to disable the fan speed control function and allow the onboard fans to constantly run at the full speed (12V). The Options are: Disabled , 4-pin (Super Quiet), and 4-pin (Workstation). Fan Speeds: The BIOS will automatically display the speed of the fans indicated in this item, in RPMs. Voltage Monitoring Vcore, AVcc, +3.3Vcc, +12V, V_DIMM, +5V, -12V, 3.3VStandby, and Vbatt. Note: In the Windows OS environment, the Supero Doctor III settings take precedence over the BIOS settings.

When first installed, Supero Doctor III adopts the temperature threshold settings previously set in the BIOS. Any subsequent changes to these thresholds must be made within Supero Doc- tor, since the SD III settings override the BIOS settings. For the Windows OS to adopt the BIOS temperature threshold settings, please change the SDIII settings to be the same as those set in the BIOS. 4-16