Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

C2SEA/C2SEE User's Manual 5. When the Boot Sector Recovery Process is complete, the system will reboot automatically and you will see a checksum error on your screen. Part 2 - BIOS Reprogramming (Re-Flashing) After completing the Boot Sector Recovery Process, you will need to reprogram (“re-flash”) the proper BIOS binary file again into the BIOS ROM in order to have the correct BIOS file loaded by the system. For details on how to flash/re-flash a BIOS, please check our website for “Update your BIOS”, or see the section 3-3 (FAQ) of this manual. DO NOT INTERRUPT THIS PROCESS! When completed, the system will reboot automatically, and you will see a checksum error again.

Press “F1” to go to setup. Press “F9” to load the defaults and then press “F10” to save and exit. D-2 Recovery Process from an IDE/SATA ATAPI Disc Drive This process is identical to the Boot Sector Recovery Process from a USB Device/ Drive (as above), except that the BIOS image file (“super.rom”) is loaded from an IDE/ATAPI CD/DVD/ROM/RW disc drive that is attached to the system. Note that loading from an IDE/SATA hard disk drive is NOT supported. 1. Using a different system, download and copy the correct BIOS binary image into a writable CD/DVD disc's Root "\" Directory. Rename the downloaded file to "super.rom", so the recovery process can recognize and read the BIOS binary file. Note:

Record/Burn the CD/DVD-R/RW disc using the ISO 9600 standard format. Refer to your CD/DVD mastering application documentation for instructions on how to do this. 2. Insert the newly-created disc into the IDE/SATA ATAPI CD/DVD ROM/RW drive of the system that has the corrupted BIOS and power the system down. 3. Follow the step-by-step instructions under Part 1 - Recovery Process from a USB Device/Drive (above) starting from Step 3 and continue on to Part 2 - BIOS Reprogramming (Re-Flashing). If your system still does not boot up after performing the above procedure, then there may be other issues with your motherboard. Please contact your customer service representative. D-2