C7C232-CB-ML User's Manual 2.2 Motherboard Installation All motherboards have standard mounting holes to fit different types of chassis. Make sure that the locations of all the mounting holes for both the motherboard and the chassis match. Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly recommended because they ground the motherboard to the chassis. Make sure that the metal standoffs click in or are screwed in tightly. Phillips Screwdriver (1) Standoffs (8) Only if Needed Phillips Screws (8) Tools Needed AUDF1 SPK1 CSOPN1 KB/MOUSE USB2/3 (2.0) CRF1 WP1 USB8/9 (3.0) CMOS1 DIMMA2 DIMMA1 DIMMB1 COM1 LEDH1 DIMMB2 Location of Mounting Holes Note:
1) To avoid damaging the motherboard and its components, please do not use a force greater than 8 lb/inch on each mounting screw during motherboard installation. 2) Some components are very close to the mounting holes. Please take precautionary measures to avoid damaging these components when installing the motherboard to the chassis. 22 AUDIO K USB4/5/6/7 USB0/1 (3.0) LAN1 FAN PCH PCH CPU FAN SLOT5 SLOT6 SLOT7 C7C232-CB-ML BR1 Rev. 1.00 PCI-E PCI-E PCI-E CN2 3.0 3.0 3.0 USB2F1 X1 X1 X16 HS1 FAN CPU USB3F1 BUZ1 PCH NGFFB1 B GPIO2 GPIO1 I-SATA5 I-SATA4 I-SATA3 CN1 DBGH1 TPMH1 DBGH1 TPMH1