Chapter 2: Installation Installing an Active CPU Heatsink with Fan 1. Locate the CPU fan power connector on the motherboard. (Refer to the layout on the right for the CPU Fan location.) Thermal Grease 2. Position the heatsink so that the heatsink fan wires are closest to the CPU fan power connector and are not interfered with other components. 3. Inspect the CPU fan wires to make sure Heatsink Fins that the wires are routed through the bottom of the heatsink. 4. Remove the thin layer of the protective film from the heatsink. Important: CPU overheating may oc cur if the protective film is not removed from the heatsink. 5. Apply the proper amount of thermal grease on the CPU. Note :
If your heatsink came with a ther mal pad, please ignore this step. 6. If necessary, rearrange the wires to make sure that the wires are not pinched between the heatsink and the CPU. Also make sure to keep clearance between the fan wires and the fins of the heatsink. 27