Supermicro C7C232-CB-ML — Supermicro C7C232-CB-ML Motherboard User's Manual PDF

Chapter 2: Installation DIMM Installation 1. Insert DIMM modules in the following AUDF1 SPK1 CSOPN1 order: DIMMB2, DIMMA2, then DIMMB1, DIMMA1. For the system to work properly, please use memory modules of the same type and speed on the motherboard. USB2/3 (2.0) CRF1 WP1 USB8/9 (3.0) CMOS1 2. Push the release tabs outwards on both ends of the DIMM slot to unlock it. 3. Align the key of the DIMM module with the COM1 LEDH1 receptive point on the memory slot. 4. Align the notches on both ends of the module against the receptive points on the ends of the slot. 5. Use two thumbs together to press the notches on both ends of the module straight down into the slot until the module snaps into place.

Notches 6. Press the release tabs to the lock positions to secure the DIMM module into the slot. DIMM Removal Release Tabs Reverse the steps above to remove the DIMM modules from the motherboard. Press both notches straight down into the memory slot. 31 AUDIO ULASNB10/1 U(3S.0B)4/5/6/7 KB/MOUSE FFAANNSS12 BR1 RC ev7 . 1C .02 032-CB-ML PCI-E SLOT5 PCH PCI-E SLOT6 PCH PCI-E SLOT7 CPU CN2 USB2F1 X1 3.0 X1 3.0 X16 3.0 HS1 FANC1 CPU USB3F1 BUZ1 PCH NGFFB1 BT1 GPIO2 GPIO1 DIMMA DIMMA I-SATA5 I-SATA4 I-SATA3 DIMMB DIMMB CN1 DBGH1 TPMH1