Chapter 2: Installation Headers Fan Headers There are two fan headers on the motherboard. FANC1 is the CPU fan, and FANS1 is the system fan. These are 4-pin fan headers; pins 1-3 are backward compatible with traditional 3-pin fans. The onboard fan speeds are controlled by Thermal Management (via Hardware Monitoring) in the BIOS. When using Thermal Management setting, please use all 3-pin fans or all 4-pin fans. Fan Header Pin Definitions Pin# Definition 1 Ground 2 +12V (Red) 3 Tachometer 4 PWM Control Speaker Header SPK1 is the internal audio speaker header.
Speaker header Pin# Definition Pin# Definition Pin Definitions 1 MONO_L 2 AUDIO_GROUND 3 MONO_R 4 X 5 AUDIO_GROUND 6 AUDIO_GROUND 7 MUTE_C 8 5V 1. FANC1 AUDF1 SPK1 CSOPN1 3 AUDIO USB4/5/6/7 (3.0) KB/MOUSE 2. FANS1 PCH SLOT5 PCI-E 3.0 X1 PCH SLOT6 PCI-E 3.0 X1 CPU SLOT7 PCI-E 3.0 X16 USB0/1 LAN1 FANS1 FANS2 2 3. Speaker Header OBR1 Rev. 1.00 C7C232-CB-ML CN2 USB2/3 (2.0) CRF1 WP1 USB2F1 USB3F1 HS1 FANC1 1 CPU USB8/9 (3.0) CMOS1 BUZ1 PCH GPIO2 NGFFB1 BT1 DIMMA1 GPIO1 DIMMA2 COM1 LEDH1 I-SATA5 DIMMB2 DIMMB1 I-SATA4 I-SATA3 I-SATA0 I-SATA1 PCHDR1 DBGH1 TPMH1 CN1 41