C7C232-CB-ML User's Manual TPM State This feature changes the TPM State. The options are Disabled and Enabled. Note: The system will restart to change the TPM State. Pending operation Use this item to schedule a TPM-related operation to be performed by a security device for system data integrity. Your system will reboot to carry out a pending TPM operation. The options are None and TPM Clear. Device Select Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both versions. The default setting is Auto .
The following are informational status messages that indicate the current TPM State: TPM Enabled Status TPM Active Status TPM Owner Status ACPI Settings Enable ACPI Auto Configuration Use this feature to enable or disable the ACPI auto configuration. If Disabled is selected, the five features below are available for configuration. The options are Disabled and Enabled. Enable Hibernation Use this feature to enable or disable the system's ability to hibernate. The options are Disabled and Enabled . ACPI Sleep State This feature selects the ACPI Sleep State that the system will enter into when the suspend button is activated. The options are Suspend Disabled and S3 (Suspend to RAM) .
Lock Legacy Resources Use this feature to enable or disable Lock of Legacy Resources. The options are Disabled and Enabled. S3 Video Repost Enable this feature for the video to resume after waking up from an S3 sleep. The options are Disabled and Enabled. 62