C7C232-CB-ML User's Manual MEBx Debug Message Output Use this feature to enable or disable MEBx debug message output. The options are Disabled and Enabled. Un-Configure ME Use this feature to enable or disable unconfigure ME without password. The options are Disabled and Enabled. Amt Wait Timer Use this feature to set the timer to wait before sending ASF_GET_BOOT_OPTIONS. Use the "-" or "+" keys to select a value. ASF Use this feature to enable or disable Alert Specification Format (ASF). ASF provides alerts on BIOS and system health information. The options are Disabled and Enabled .
Activate Remote Assistance Process Use this feature to enable or disable trigger Client Initiated Remote Access (CIRA) boot. The options are Disabled and Enabled. USB Provisioning of AMT Use this feature to enable or disable USB Provisioning of AMT. The options are Disabled and Enabled . PET Progress Use this feature to enable or disable Platform Event Trap (PET) events progress to receive PET events or not. Enable this feature to receive warning of possible system failiures. The options are Disabled and Enabled . AMT CIRA Timeout This item displays the CIRA timeout value. WatchDog Select Enabled to allow AMT to reset or power down the system if the operating system or BIOS hangs or crashes.
The options are Disabled and Enabled. OS Timer / BIOS Timer These options appear if WatchDog (above) is enabled. This is a timed delay in seconds, before a system power down or reset after a BIOS or operating system failure is detected. Directly enter the value in seconds. 64