Chapter 4: BIOS Network Stack Configuration Network Stack Select Enabled to enable UEFI (Unified Extensible Firmware Interface) for network stack support. The options are Disabled and Enabled. *If Network Stack is Enabled, the four items below are available for configuration: IPv4 PXE Support Select Enabled to enable IPv4 PXE boot support. The options are Enabled and Disabled. IPv6 PXE Support Select Enabled to enable IPv6 PXE boot support. The options are Enabled and Disabled. PXE boot wait time Use this option to specify the wait time to press the ESC key to abort the PXE boot. Use the "+" or "-" keys to set the value. The default setting is 0 .
Media detect count Use this option to specify the number of times media will be checked. Use the "+" or "-" keys to set the value. The default setting is 1 . CSM Configuration CSM Support Select Enabled to support the EFI Compatibility Support Module (CSM), which provides compatibility support for traditional legacy BIOS for system boot. The options are Enabled and Disabled. CSM 16 Module Version This feature displays the version number. Option ROM Messages Use this feature to set the display mode for the Option ROM. Select Keep Current to display the current AddOn ROM setting. Select Force BIOS to use the Option ROM display set by the system BIOS.
The options are Force BIOS and Keep Current. INT19 Trap Response Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Immediate, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup immediately and allow the drives that are attached to these host adaptors to function as bootable disks. If this item is set to Postponed, the ROM BIOS of the host adaptors will not capture Interrupt 19 immediately and allow the drives attached to these adaptors to function as bootable devices at bootup. The options are Immediate and Postponed. 77