Chapter 4: BIOS I/O Buffer Voltage Select Use this feature to select the voltage for the I/O buffer. The options are 3.3V and 1.8V. HD Audio Link Frequency Use this feature to select the HD audio link frequency. The options are 6 MHz, 12 MHZ, and 24 MHz . iDisplay Link Frequency Use this feature to select the HD audio link frequency. The options are 48 MHZ and 96 MHz . Serial IO Configuration Touch Panel Use this feature to select which touch screen controller to use. The options are SPI Touch or I2C Touch. BT/UART Mux Select Use this feature to select which signal for the M.2 module. The options are UART Signal or BT Signal.
I2C0 Controller Use this feature to enable or disable the Serial I/O Controller. The options are Disabled and Enabled. *If this feature is Enabled, then the Serial IO I2C0 Settings submenu is available for configuration: Serial IO I2C0 Setting I2C IO Voltage Select Use this feature to select the I2C IO voltage controller. the options are 3.3V and 1.8V. Connected device Use this feature to idicate what type of device is connected to this serial prot control ler. The options are Disabled , Synaptics Precision Touchpad, Synaptics Forcepad, and Custom device. 89