Appendix A: BIOS Codes Appendix A BIOS Codes A.1 BIOS Error POST (Beep) Codes During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur. Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen. Fatal errors are those which will not allow the system to continue the boot-up procedure. If a fatal error occurs, you should consult with your system manufacturer for possible repairs. These fatal errors are usually communicated through a series of audible beeps.
The table below lists some common errors and their corresponding beep codes encountered by users. 97 BIOS Beep (POST) Codes Beep Code Error Message Description 1 beep Refresh Circuits have been reset (Ready to power up) 5 short, 1 long Memory error No memory detected in system 5 long, 2 short Display memory read/write error Video adapter missing or with faulty memory 1 long continuous System OH System overheat condition