Supermicro C7Z87-OCE — MNL-1507 - Z87 - Motherboard - Super Micro Computer, Inc.

Chapter 2: Installation For Microsoft Windows users: Microsoft implemented a design change in the Windows XP with Service Pack 2 (SP2) and Windows Vista. This change is specific to the behavior of Physical Address Extension (PAE) mode which improves driver compatibility. For more information, please read the following article at Microsoft’s Knowledge Base website at: http://support.microsoft. com/kb/888137. Memory Population Guidelines When installing memory modules, the DIMM slots should be populated in the following order: P1-DIMMA2, P1-DIMMB2, then P1-DIMMA1, P1-DIMMB1. Always use DDR3 DIMM modules of the same size, type and speed. Mixed DIMM speeds can be installed.

However, all DIMMs will run at the speed of the slowest DIMM.

2-13 Possible System Memory Allocation & Availability System Device Size Physical Memory Remaining (-Available) (4 GB Total System Memory) Firmware Hub flash memory (System BIOS) 1 MB 3.99 Local APIC 4 KB 3.99 Area Reserved for the chipset 2 MB 3.99 I/O APIC (4 Kbytes) 4 KB 3.99 PCI Enumeration Area 1 256 MB 3.76 PCI Express (256 MB) 256 MB 3.51 PCI Enumeration Area 2 (if needed) -Aligned on 256-MB boundary- 512 MB 3.01 VGA Memory 16 MB 2.85 TSEG 1 MB 2.84 Memory available to OS and other applications 2.84 Recommended Population (Balanced) DIMMA2 DIMMB2 DIMMA1 DIMMB1 Total System Memory 2GB 2GB 4GB 2GB 2GB 2GB 2GB 8GB 4GB 4GB 8GB 4GB 4GB 4GB 4GB 16GB 8GB 8GB 16GB 8GB 8GB 8GB 8GB 32GB