C7Z87-OCE User’s Manual RING Voltage Offset (mV) Use this feature to set to set the RING Voltage Offset value from -1000mV to 998mV. Enter 0 to use the manufacture default value. Offset Prefix Use this feature to set the Offset value as a positive (+) number or a nega tive (-) number. Press "+" or "-" on your keyboard to make a selection. The default setting is "+" . Overclocking SVID and FIVR Option The following Overclocking SVID and FIVR Option submenu items will display: SVID Control Enable Select Enabled to enable SVID control for Intel SVID Protocol support. If this setting is set to Disabled, there will be no change made to SVID until the CPU powers down.
The options are Enabled and Disabled. SVID Override Voltage Target (mV) Use this feature to set the value for SVID Override Voltage Target (up to 2500 mV). Enter 0 to use the manufacture default value. FIVR Faults Enable Select Enabled to enable FIVR Faults support. If this setting is set to Disabled, there will be no change made to FIVR Faults settings until the CPU powers down. The options are Enabled and Disabled. FIVR Efficiency Enable Select Enabled to enable FIVR Efficiency support. If this setting is set to Disabled, there will be no change made to FIVR Efficiency status until the CPU powers down. The options are Enabled and Disabled.
Overclocking GT Option The following Overclocking GT Option submenu items will display: GT Adaptive Voltage Target (mV) Use this feature to set the GT Adaptive voltage Target(mV) value from 0mV to 2000mV. Enter 0 to use the manufacture default value. GT Voltage Mode Use this feature to select the Overclocking GT mode. The options are Override and Adaptive . 4-28