4.10 I/M Readiness This function checks whether or not the various emission-related systems on the vehicle are operating properly, and are ready for I/M (Inspection and Maintenance) testing. It can also be used to check the monitor running status and to confirm if the repair of a car fault has been performed correctly. Note: The vehicle should only be considered ready for inspection and allowed to pass emissions if all required tests have been passed. 4.11 Performance Test Vehicle Performance Test allows you to make accurate measurements of vehicle acceleration, providing results at intervals defined by set speed and fixed distance measurements.
4.11.1 Performing a Vehicle Performance Test 1. Tap Performance Test from the home screen. 2. A warning message appears. Carefully read the message and tap OK to continue. 29