Output rollers Face-down delivery assembly 1 Remove the following assemblies: Toner cartridge, media tray, and cable pod. See “Toner cartridge” on page 15 through “Cable pod” on page 17. Left side, back, right side, and top covers. See “Left side cover” on page 18 through “Top cover” on page 29. Fuser assembly. See “Fuser assembly” on page 42. 2 Remove two screws (callout 1) and lift the face-down delivery assembly away from the fuser assembly. 1 Figure 35. Remove the output rollers 46 Chapter 2 - Removal and replacement Q1342-90910