ADF feeder cover handle 1 Remove the ADF feeder cover. See page 104. 2 Remove two springs (callout 1) (one on the right side is shown). 3 Remove the latch (callout 2). 1 1 2 2 Figure 68. ADF feeder cover handle (1 of 2) 4 Slide the shaft to the left and tilt the right end up. 5 Slide the handle (callout 3) off to the right and pull the shaft to the left to remove it. 13 Figure 69. ADF feeder cover handle (2 of 2) 106 Chapter 6 Removal and replacement C8523-90921