ADF base cover assembly 1 Remove the following covers: • ADF feeder cover—See page 104. • ADF back cover—See page 107. • ADF front cover—See page 108. • flatbed back cover—See page 113. 118 Chapter 6 Removal and replacement C8523-90921 2 Remove the white board. See page 110. 3 Remove six brown screws (callout 1) that attach the sheet metal to plastic. WARNING! Do not remove the screws connected to the opposite hinge. 1 Figure 85. ADF base cover assembly (1 of 9) 4 Disconnect three connectors (callout 2) from the ADF intermediate PCB. 4 Disconnect three connectors (callout 2) from the ADF interme Figure 86. 42 ADF base cover assembly (2 of 9)