Delivery motor 1 Remove the ADF back cover. See page 107. 2 Use needlenose pliers to remove one spring (callout 1). 3 Remove one screw (callout 2) and one cable clamp. 1 1 2 2 Figure 129. Delivery motor (1 of 2) 4 Remove three cable ties (callout 3) and disconnect one connector (callout 4). 5 Remove three screws (callout 5). 5 5 3 3 4 4 Figure 130. Delivery motor (2 of 2) 6 Slide the delivery motor to the right. 7 Remove the delivery motor with the motor mount. 8 Remove two screws from the back of the mount. 9 Remove the delivery motor from the motor mount. 146 Chapter 6 Removal and replacement C8523-90921