Unpacking the MFP 1 Remove the plastic wrap from the shipping box. 2 Remove the two white, plastic shipping locks, and then remove the top of the box. Pull the locks straight out to remove them from the box. 3 Remove the six remaining shipping locks that hold the sides in place. 4 Remove the reinforcing ribbon from the top of the box. 5 Carefully remove the sides of the box. Note Four corner supports in the box can fall out when the sides are removed. 6 Remove and set aside the bag that contains the print cartridge (located on the top of the printer). Also remove the manual, cables, and software from the front piece of Styrofoam. 7 Remove the ramps (callout 1) by gently lifting them up.
The ramps are located near the back piece of Styrofoam. Figure 9. Unpacking the MFP 8 Lift the two Styrofoam pieces away from the MFP. 9 Remove the plastic wrap from the MFP, and set aside the ADF output bin. C8523-90921 Setup 31 2 2 1