Atari · Centipede ST-182 · 1 pp.

Atari Centipede ST-182 Arcade Cabinet Backdoor Sheet Manual PDF

Related manuals

Document text

\V/ 5S \Y —— ™ —/ ; Game Price Settings , Self-Test Procedure Instruction 2nd pring The white block below contains Atari’s suggested settings. All numbers 41 thru 8 are toggle settings on the 8-toggle switch at.lo- Circled numbers refer to game pricing labels you should use with each situation (labels are below). Use the label no: 6(indica: cation N8, on the Centipede™ Game PCB (the LEFT switch as- ted with ©)) only if you set toggle 7 at PCB switch assembly P10 ~ sembly). to on. Results if Test Passes (if results are not as indicated, 50¢ PER CREDIT see list of failures that follows) 1. Begin: Set self-test switch to on position The monitor displays the picture below.

The game produces no sound at . all. The two start-switch LEDs will stay on throughout self-test. 2. Mini-Trak Ball Test: Roll the Mini-Trak Ball controls in all directions. The centipede head moves around on the screen in directions corre- ; sponding to Mini-Trak Ball control. Important Note to Operators: If the operation, maintenance and service manual was not included in this game when you unpacked . No bonus As long as you activate (close) each switch, you'll hear a high beep. $1.00 = 3 credits $1.00 = 3 credits Straight it, contact your distributor to get a free copy. (All Atari manuals for coin-operated games also include 3. Switch Test:

One after another, activate and release all control-panel ] Bonus $.75 = 2 credits Bonus 25¢ Door complete illustrated parts lists.) switches, the slam switch, and coin switches.* 4. Audio I/O Chip Test: One after another, press and hold 2 of the control-panel Volume increases and pitch decreases with each additional switch that switches and at least one of the coin switches. 25¢/$1.00 . . is activated. Door or 25¢/25/$1.00 5. Audio /O Channel Test: Door Press 1-player start button four times. You'll hear a high beep for each press of the button. 6. Background Color Test: Press 1-piayer start button at least 16 times. Background color changes with each press of the 1-player start button. 7.

Object Color Test: Press 2-piayer start button at least 16 times. Objects. on playfield change color. . . 25¢ PER CREDIT Bonus 8. Moving Object Test: Watch N jo bonus the screen, and move the Mini-Trak Ball around. Place the moving object in an open Press fire button several times. Each press of the fire button changes the moving object to another mov- area of the screen. - ing object. At certain points in the series, the object will disappear. This is not a failure indication. Straight 25¢ Door 9. Erasing the High Score Table (optional) The current three highest scores are held in permanent memory, even if the game is unplugged.

If you want to erase these scores, simultaneously press either fire and two start buttons. The 4 FF message in the upper left corner of the screen will then be displayed. Tha average game time data will also be erased, but still displayed on the screen. @) : = $.50 8 7 6 5 Off Off Off Off 4 Off 3 Off 2 On 1 Bonus i 3 credits $1.00 == 5 credits 25¢/$1.00 Door or 25¢/25¢/$1.00 10. End: When satisfied with test, set self-test switch to off position. Door * Activate coin switches by inserting at least one coin in each coin slot. You will not trip the coin counters as long as you Stay in self-test. NO.

OF LIVES AT START OF GAME "t on ENTIRE be CHARACTER 2 v yh x BONUS COIN SETTING (means vu MECH MULTIPLIERS $ (L, R if you have a 2-mech coin door) 0. TOTAL NO. OF he L CREDITS PLAYED Q “for every 3 coins inserted, logic adds 1 more coin”). Blank if no bonus coins(s) given. : play, or if you have German coin mechanisms G GAME DIFFICULTY E SETTING ¢ 7 6 5 4 (accurate to + 4 secs.) of beeps and determine which than moves smoothly, or doesn’t move at all. One of the Coupter PCBs in either Mini-Trak Ball control may be bad, harness wires or test switch to off, then again to the on position.

Possible Bad Number of Beeps Given 1 2 RAM 3 ne 5 Off Off On Off Right coin mech x 1 Right coin mech x 4 Ott Off Right coin mech x 6 On Left coin mech x 1 $ : , $ On Off On For every 4 coins* coin* On = Off,_— Off For every 4 coins inserted, game On on inserted, game logic adds 1 more coin* inserted, game logic adds 1 more ing® j me logic adds 2 more logh °° . On For every 5 coins* inserted, game logic adds 1 more ott coin* For every 3 coins* * inserted, game logic adds 1 more coin* oo . ns L5 4. Audio UO Chip Test: ? M7 NS No bonus coins On 6 10 x 2 On 1 DM. 1 tings $ Manufacturer's suggested setting pa 5. Audio VO Channel Test:

Any bad RAM must be replaced before the computer can check the other RAMs, as well as continue with the self-test. Left coin mech For every 2 coins* volume turned all the way down, or loose connector. No increase in volume or decrease in pitch indicates bad custom $ Right coin mech x 5 L7 audio VO chip at location BIC/D3. $ On *In the U.S., a “coin” is defined as 25¢. in Germany a “coin” is Ne coin” for 2 credt 1 coin* for 1 credit 2 coins* for=1 credit Off cates a bad switch, loose harness wires, bad LED-driving circuitry, 3 eeibe tor 2 credits On ott . 3. Switch Test: Sound is constantly on, even though you are not activating any switch. Or, no beep is given for any switch, or LED is dark.

Indi- Option Off Ott connector may be loose, Mini-Trak Ball reading circuitry on Game PCB may be bad, or Mini-Trak Ball bearings may need oiling. Chip Location H2 F2 On Ol On On 2. Mini-Trak Ball Test: test, press the reset pushbutton on the game PCB, or set the self- oe Fre On Off: ‘The character doesn’t move in same direction as ball, jumps rather be bad. To restart the 1 on RAM FAILURE is indicated by one to 10 beeps. Note the number may 2 On Off Results if Test Fails RAM 3 On A 1. Begin: : PCB (at N8). LEFT switch when PCB is in game 8 AVG. GAME TIME a only if you set toggle 8 at PCB switch assembly N9 to off. in your door.

Toggle Settings of 8-Toggie Switch on Centipede J I IME CAME 1 33 To achieve bonus plays, all coins : must be inserted be’ tore pressing the start button. The label no. 6 shown below should be used in case you need to temporarily set the Centipede™ game on free SET C, R COIN v Stroet diel TRAK BALLINPUTS — The switch settings below relate to options for game price, coin mechanism multipliers, and bonus play. This information is useful A On one out of the four activations, no audio is produced. Indicates one channel is bad in the custom I/O audio chip at location B/C/D3 ‘ —— NN (replace entire chip).

ROM/PROM FAILURE is indicated by two groups of numbers in y the upper left corner of the screen. The number at the far left indi- 6. Background Color Test: cates the location of the failing PROM/ROM(s). Identify the bad ROM/PROM with the tabie below. If the screen displays “gar- Background doesn't change color, or doesn't display all 16 colors. Indicates bad color RAM chip. (RAM failure would have been indi- bage,” or the logic produces strange audio or randomly activates cated earlier with from 3 through 10 beeps.) the coin counters, the chip at location J1 is probably bad. Ignore the hexadecimal location number. numbers 7. Object Color Test:

Objects don’t change just to the right of the chip- Displayed Number 0 Failing ROM/PROM Chip Location D1 1 E1 3 or “garbage” x b5* 5 BIC/D3 ; by CENTIPEDE™ GAME PCB yea rd IR Potts color, or don’t dispiay ali 16 colors. RAM failure. OPTION SWITCHES 8. Moving Object Test: Object doesn’t change to another object. ROM/RAM ] d e ) ar failure. A J1 ADS ron \/ *\If you replace or erase this ROM, the number 4 FF will be displayed throughout the self-test. The next time you enter self-test, the 4 disappears after a game is played. Otherwise the self-test will continue to display the numbers 4 FF. 3 coins YR Reel JSass 2 coins = 1 ENpla coin =3 plays ot) aM Game a $1 Pricing Labels (Susan B.

Page 1