A+ SERVER 2021TM-BTRF/BIBXRF User's Manual 2-4 Installing the System into a Rack This section provides information on installing the SC827 chassis into a rack unit with the quick-release rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you are using. NOTE: This rail will fi t a rack between 26" and 33.5" deep. Separating the Sections of the Rack Rails The chassis package includes two rail assemblies in the rack mounting kit. Each assembly consists of two sections:
an inner fi xed chassis rail that secures directly to the server chassis and an outer fi xed rack rail that secures directly to the rack itself. 1 1 Rail Assembly Separating the Inner and Outer Rails Locate the rail assembly in the chassis 1. packaging. Extending the Rails Extend the rail assembly by pulling it 2. outward. 1 2 1 3 Press the quick-release tab. 3. Quick- Release Tab Separate the inner rail extension from 4. the outer rail assembly. 1 4 Separating the Inner Rail Extension Figure 2-1: Separating the Rack Rails 2-4