Chapter 5: Advanced Serverboard Setup Chapter 5 Advanced Serverboard Setup This chapter covers the steps required to install the H8DMT-F/H8DMT-IBXF serverboard into the chassis, connect the data and power cables and install add-on cards. All serverboard jumpers and connections are also described. A layout and quick reference chart are included in this chapter for your reference. Remember to completely close the chassis when you have fi nished working with the serverboard to better cool and protect the system. Note: The H8DMT-F serverboard shares the same layout as the H8DMT-IBXF serverboard, but does not include Infi niBand components.
Both serverboards have full IPMI capability and a dedicated LAN port above the two USB ports for this capability. 5-1 Handling the Serverboard Electrostatic discharge (ESD) can damage electronic com ponents. To prevent damage to any printed circuit boards (PCBs), it is important to handle them very carefully (see previous chapter). To prevent the serverboard from bending, keep one hand under the center of the board to support it when handling. The following measures are generally suffi cient to protect your equipment from electric static discharge. Precautions Use a grounded wrist strap designed to prevent Electrostatic Discharge (ESD).
Touch a grounded metal object before removing any board from its antistatic bag. Handle a board by its edges only; do not touch its components, peripheral chips, memory modules or gold contacts. When handling chips or modules, avoid touching their pins. Put the serverboard, add-on cards and peripherals back into their antistatic bags when not in use. 5-1