Chapter 5: Advanced Serverboard Setup 5-7 Adding PCI Add-On Cards The 2021TM-BTRF/BIBXRF can accommodate four low-profi le, full-length PCI add-on cards. Installing an Add-on Card Begin by removing the shield for the PCI slot you wish to populate. 1. Fully seat the card into the slot, pushing down with your thumbs evenly on 2. both sides of the card. Finish by using a latch to secure the top of the card shield to the chassis. The 3. PCI slot shields protect the serverboard and its components from EMI and aid in proper ventilation, so make sure there is always a shield covering each unused slot.
5-11 Possible System Memory Allocation & Availability System Device Size Physical Memory Remaining (-Available) (4 GB Total System Memory) Firmware Hub fl ash memory (System BIOS) 1 MB 3.99 GB Local APIC 4 KB 3.99 GB Area Reserved for the chipset 2 MB 3.99 GB I/O APIC (4 Kbytes) 4 KB 3.99 GB PCI Enumeration Area 1 256 MB 3.76 GB PCI Express (256 MB) 256 MB 3.51 GB PCI Enumeration Area 2 (if needed) -Aligned on 256-MB boundary- 512 MB 3.01 GB VGA Memory 16 MB 2.85 GB TSEG 1 MB 2.84 GB Memory available for the OS & other applications 2.84 GB