A+ SERVER 2021TM-BTRF/BIBXRF User's Manual NMI Button The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin defi nitions. Universal Serial Bus (USB) Two Universal Serial Bus ports (USB 2.0) are located beside the LAN1/2 ports. Two additional ports (USB4/5) are included on the serverboard near the COM2 header. Two USB 2.0 headers (USB2/3) are also included on the motherboard. These may be connected to provide front side access. A USB cable (not included) is needed for the connection. See the tables on the right for pin defi nitions. Serial Ports Two serial ports are included on the serverboard.
COM1 is a backpanel port and COM2 is a header located on the serverboard. See the table on the right for pin defi nitions. NC = No Connection 5-16 NMI Button Pin Defi nitions (JF1) Pin# Defi nition 19 Control 20 Ground Back Panel USB (USB 0/1, 4/5) Pin# Defi nitions 1 +5V 2 PO- 3 PO+ 4 Ground USB Headers (USB 2/3) Pin Defi nitions USB 2 Pin # Defi nition USB 3 Pin # Defi nition 1 +5V 1 +5V 2 PO- 2 PO- 3 PO+ 3 PO+ 4 Ground 4 Ground 5 Key 5 N/C Serial Port Pin Defi nitions (COM1/COM2) Pin # Defi nition Pin # Defi nition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC1