Chapter 7: BIOS Selects the serial port to use for console redirection. Options are COM1 and COM2. Serial Port Number Serial Port Mode Selects the serial port settings to use. Options are (115200 8, n, 1) , (57600 8, n, 1), (38400 8, n, 1), (19200 8, n, 1) and (09600 8, n, 1). Flow Control Selects the fl ow control to be used for console redirection. Options are None , Hardware and Software. Redirection After BIOS POST Options are Disabled (no redirection after BIOS POST), Boot Loader (redirection during POST and during boot loader) and Always (redirection always active). Note that some OS's may not work with this set to Always . Terminal Type Selects the type of the target terminal.
Options are ANSI , VT100 and VT- UTF8. VT-UTF8 Combo Key Support Allows you to Enable or Disable VT-UTF8 combination key support for ANSI/ VT100 terminals. Options are Enabled and Disabled. Sredir Memory Display Delay Use this setting to set the delay in seconds to display memory information. Options are No Delay , 1 sec, 2 secs and 4 secs. X Hardware Health Monitor This feature allows the user to monitor system health and review the status of each item as displayed. CPU Overheat Alarm Use the "+" and "-" keys to set the CPU temperature threshold to between 65o and 90o C. When this threshold is exceeded, the overheat LED on the chassis will light up and an alarm will sound.
The LED and alarm will turn off once the 7-13