A+ SERVER 2021TM-BTRF/BIBXRF User's Manual X Hard Disk Drives This feature allows the user to specify the boot sequence from all available hard disk drives. The settings are Disabled and a list of all hard disk drives that have been detected (i.e., 1st Drive, 2nd Drive, 3rd Drive, etc). 7-5 Security Settings The AMI BIOS provides a Supervisor and a User password. If you use both passwords, the Supervisor password must be set fi rst. Supervisor Password This item indicates if a Supervisor password has been entered for the system. "Not Installed" means a Supervisor password has not been used. User Password This item indicates if a user password has been entered for the system.
"Not Installed" means that a user password has not been used. Change Supervisor Password Select this feature and press to access the submenu, and then enter a new Supervisor Password. User Access Level (Available when Supervisor Password is set as above) Full Access : grants full User read and write access to the Setup Utility, Use this feature to set the user's access level. The options are: View Only: allows access to the Setup Utility, but cannot change the fi elds, Limited: allows only limited fi elds to be changed such as Date and Time, No Access: prevents User access to the Setup Utility.
Change User Password Select this feature and press to access the submenu, and then enter a new User Password. Clear User Password (Available only if User Password has been set) This item allows you to clear a user password after it has been entered. Password Check This item allows you to check a password after it has been entered. The options are Setup and Always. 7-18