User's Manual Statement War ning: This equipment has been certified to comply with the limits for a Class B computing device, pursuant to subpart J of Part 15 of the Federal Communications Commission's rules, which are designed to provide reasonable protection against radio and television interference in a residential installation. If not installed properly, in strict accordance with the manufacturer's instructions, it may cause such interference. If you suspect interference, you can test this equipment by turning if off and on. If this equipment does cause interference, correct it by doing any of the following: • Reorient the receiving antenna or AC plug.
• Change the relative positions of the computer and the receiver. • Plug the computer into a different outlet so the computer and receiver are on different circuits. CA U TIO N: Only peripherals with shield-grounded cables (computer input- oucpuc devices, terminals printers, ere.) certified to comply with Cl ass B limits, can be attached to this printer. Operation with non-certified peripherals is likely to resulc in communications interference. Your house AC wall receptacle muse be a three-pronged type (AC ground). If nor, contact an electrician to install the proper receptacle.
If a multi-connector box is used to connect the computer and peripherals to AC , the ground must be common to al l units. If necessary, consult your Commodore dealer or an experienced radio-television technician for additional suggestions. You may find the following FCC booklet helpful: "How to Identify and Reso l ve Radio-TV interference Problems." The booklet is available from the U. S. Government Printing Office, Washington, D.C. 20402, stock no. 004-000-00345-4. 6/ 5/86 ~