Configuring Multiple Stream Reservation Protocol You can configure MSRP timer values using the below commands: Configuring Audio Video Bridging Configuring Multiple Stream Reservation Protocol Command or Action Purpose Device> enable Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 interface interface-id Example: Device(config)# interface te1/1/1 Defines the interface to be configured as a trunk, and enters interface configuration mode. Step 4 mvrp registration {fixed | forbidden | normal} Example: Device(config-if)# mvrp registration fixed Registers MVRP with the MAD instance.
• fixed - Fixed registration • forbidden - Forbidden registration • normal - Normal registration Step 5 mvrp timer {join | leave | leave-all | periodic} Example: Device(config-if)# mvrp timer join Configures the MVRP timer. • join - Timer controls the interval between transmit opportunities that are applied to the ASM • leave - The timer controls the RSM waits in the LV state before transiting to the MT state • leave-all - The timer control the frequency with which the LeaveAll SM generates LeaveAll PDUs • periodic - Periodic timer Step 6 exit Example: Device(config-if)# exit Returns to global configuration mode. Configuring Audio Video Bridging 14