Using MS-CHAP Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) is the Microsoft version of CHAP and is an extension of RFC 1994. Like the standard version of CHAP, MS-CHAP is used for PPP authentication; in this case, authentication occurs between a PC using Microsoft Windows NT or Microsoft Windows 95 and a Cisco device or access server acting as a network access server. MS-CHAP differs from the standard CHAP as follows: • MS-CHAP is enabled by negotiating CHAP Algorithm 0x80 in LCP option 3, Authentication Protocol. • The MS-CHAP Response packet is in a format designed to be compatible with Microsoft Windows NT 3.5 and 3.51, Microsoft Windows 95, and Microsoft LAN Manager 2.
x . This format does not require the authenticator to store a clear or reversibly encrypted password. • MS-CHAP provides an authenticator-controlled authentication retry mechanism. • MS-CHAP provides an authenticator-controlled change password mechanism. • MS-CHAP defines a set of “reason-for failure” codes returned in the Failure packet message field. Depending on the security protocols you have implemented, PPP authentication using MS-CHAP can be used with or without AAA security services. If you have enabled AAA, PPP authentication using MS-CHAP can be used in conjunction with both TACACS+ and RADIUS.
The table below lists the vendor-specific RADIUS attributes (IETF Attribute 26) that enable RADIUS to support MS-CHAP. Table 1: Vendor-Specific RADIUS Attributes for MS-CHAP Domain Stripping The AAA Broadcast Accounting feature allows accounting information to be sent to multiple AAA servers at the same time, that is, accounting information can be broadcast to one or more AAA servers simultaneously. This functionality allows you to send accounting information to private and public AAA servers. It also provides redundant billing information for voice applications. The Domain Stripping feature allows domain stripping to be configured at the server group level.
Per-server group configuration overrides the global configuration. If domain stripping is not enabled globally, but it is enabled in a server group, then it is enabled only for that server group. Also, if virtual routing and forwarding (VRF)-specific domain stripping is configured globally and in a server group for a different VRF, domain stripping is enabled in both the VRFs. VRF configurations are taken from server-group configuration Configuring Authentication Using MS-CHAP Vendor-ID Number Vendor-Type Number Vendor-Proprietary Attribute Description 311 11 MSCHAP-Challenge Contains the challenge sent by a network access server to an MS-CHAP user.
It can be used in both Access-Request and Access-Challenge packets. 211 11 MSCHAP-Response Contains the response value provided by a PPP MS-CHAP user in response to the challenge. It is only used in Access-Request packets. This attribute is identical to the PPP CHAP Identifier. Configuring Authentication 16