cisco — Configuring ARAP Authentication Using AAA

The list-name is any character string used to name the list you are creating. The method argument refers to the actual method the authentication algorithm tries. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To specify that the authentication should succeed even if all methods return an error, specify none as the final method in the command line. For example, to specify that authentication should succeed even if (in this example) the TACACS+ server returns an error, enter the following command:

Device(config)# aaa authentication ppp default group tacacs+ none Because none allows all users logging in to authenticate successfully, it should be used as a backup method of authentication. Note Configuring ARAP Authentication Using AAA Using the aaa authentication arap command, you can create one or more lists of authentication methods that are tried when AppleTalk Remote Access Protocol (ARAP) users attempt to log in to the device. These lists are used with the arap authentication line configuration command. Use the following commands starting in global configuration mode:

Procedure Configuring Authentication Configuring ARAP Authentication Using AAA Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 aaa new-model Example: Device(config)# aaa new-model Enables AAA. Step 4 aaa authentication arap Example: Device(config)# aaa authentication arap Example: Enables authentication for ARAP users. Step 5 line number Example: Device(config)# line 1 (Optional) Changes to line configuration mode. Configuring Authentication 20