cisco — Configuring NASI Authentication Using AAA

To configure NASI authentication using AAA, use the following commands starting in global configuration mode: Procedure What to do next The list-name is any character string used to name the list you are creating. The method argument refers to the actual list of methods that the authentication algorithm tries, in the sequence entered. To create a default list that is used when a named list is not specified in the aaa authentication nasi command, use the default keyword followed by the methods you want to use in default situations. The additional methods of authentication are used only if the previous method returns an error, not if it fails.

To specify that the authentication should succeed even if all methods return an error, specify none as the final method in the command line. Configuring Authentication Configuring NASI Authentication Using AAA Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 aaa new-model Example: Device(config)# aaa new-model Enables AAA globally. Step 4 aaa authentication nasi Example: Device(config)# aaa authentication nasi Enables authentication for NASI users. Step 5 line number Example:

Device(config)# line 4 (Optional--not needed if default is used in the aaa authentication nasi command.) Enters line configuration mode. Step 6 nasi authentication list-name Example: Device(config-line)# nasi authentication nasi-authen (Optional--not needed if default is used in the aaa authentication nasi command.) Enables authentication for NASI on a line. Step 7 end Example: Device(config-line)# end Exits line configuration mode and returns to the privileged EXEC mode. Configuring Authentication 22