Configuring Domain Stripping at the Server Group Level Procedure Configuring Non-AAA Authentication Methods Configuring Line Password Protection This task is used to provide access control on a terminal line by entering the password and establishing password checking. Note If you configure line password protection and then configure TACACS or extended TACACS, the TACACS username and password take precedence over line passwords. If you have not yet implemented a security policy, we recommend that you use AAA. Configuring Authentication Configuring Domain Stripping at the Server Group Level Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode.
Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 aaa group server radius server-name Example: Device(config)# aaa group server radius rad1 Adds the RADIUS server and enters server group RADIUS configuration mode. • The server-name argument specifies the RADIUS server group name. Step 4 domain-stripping [strip-suffix word] [right-to-left ] [prefix-delimiter word] [delimiter word] Example: Device(config-sg-radius)# domain-stripping delimiter username@example.com Configures domain stripping at the server group level. Step 5 end Example:
Device(config-sg-radius)# end Exits server group RADIUS configuration mode and returns to the privileged EXEC mode. Configuring Authentication 30