cisco — Defining PPP Authentication Using MS-CHAP

What to do next The keyword noescape prevents users from using escape characters on the hosts to which they are connected. The nohangup feature does not disconnect after using the autocommand. Passwords will be displayed in clear text in your configuration unless you enable the service password-encryption command. Caution Defining PPP Authentication Using MS-CHAP To define PPP authentication using MS-CHAP, use the following commands in interface configuration mode: Procedure Configuring Authentication Defining PPP Authentication Using MS-CHAP Command or Action Purpose Device(config)# end Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode.

Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 encapsulation ppp Example: Device(config)# encapsulation ppp Enables PPP encapsulation. Step 4 interface type number Example: Device(config)# interface gigabitethernet 1/0/2 Configures an interface and enters interface configuration mode. Step 5 ppp authentication ms-chap [if-needed] [list-name | default] [callin] [one-time] Example: Device(config-if)# ppp authentication ms-chap default callin Defines PPP authentication using MS-CHAP. Step 6 end Example: Device(config-if)# end Exits interface configuration mode and returns to privileged EXEC mode.

Configuring Authentication 33