cisco — Configuring BGP Neighbors and Peer Groups

Configuring BGP Configuring BGP Neighbors and Peer Groups Command or Action Purpose Step 5 neighbor ip-address peer-group peer-group-name Makes a BGP neighbor a member of the peer group. Step 6 neighbor {ip-address | peer-group-name} remote-as number Specifies a BGP neighbor. If a peer group is not configured with a remote-as number, use this command to create peer groups containing EBGP neighbors. The range is 1 to 65535. Step 7 neighbor {ip-address | peer-group-name} description text (Optional) Associates a description with a neighbor.

Step 8 neighbor {ip-address | peer-group-name} default-originate [route-map map-name] (Optional) Allows a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route. Step 9 neighbor {ip-address | peer-group-name} send-community (Optional) Specifies that the COMMUNITIES attribute be sent to the neighbor at this IP address. Step 10 neighbor {ip-address | peer-group-name} update-source interface (Optional) Allows internal BGP sessions to use any operational interface for TCP connections. Step 11 neighbor {ip-address | peer-group-name} ebgp-multihop (Optional) Allows BGP sessions, even when the neighbor is not on a directly connected segment.

The multihop session is not established if the only route to the multihop peer’s address is the default route (0.0.0.0). Step 12 neighbor {ip-address | peer-group-name} local-as number (Optional) Specifies an AS number to use as the local AS. The range is 1 to 65535. Step 13 neighbor {ip-address | peer-group-name} advertisement-interval seconds (Optional) Sets the minimum interval between sending BGP routing updates. Step 14 neighbor {ip-address | peer-group-name} maximum-prefix maximum [threshold] (Optional) Controls how many prefixes can be received from a neighbor. The range is 1 to 4294967295. The threshold (optional) is the percentage of maximum at which a warning message is generated.

The default is 75 percent. Step 15 neighbor {ip-address | peer-group-name} next-hop-self (Optional) Disables next-hop processing on the BGP updates to a neighbor. Step 16 neighbor {ip-address | peer-group-name} password {0-7}string (Optional) Sets MD5 authentication on a TCP connection to a BGP peer. The same password must be configured on both BGP peers, or the connection between them is not made. The encryption modes supported for the password are: Configuring BGP 29