Configuring BGP Configuring Aggregate Addresses in a Routing Table Command or Action Purpose aggregating many paths because this route must be continually withdrawn and updated. Step 6 aggregate-address address-mask summary-only Example: Device(config-router)# aggregate-address 10.0.0.0 255.0.0.0 summary-only (Optional) Advertises summary addresses only. Step 7 aggregate-address address mask suppress-map map-name Example: Device(config-router)# aggregate-address 10.0.0.0 255.0.0.0 suppress-map map1 (Optional) Suppresses selected, more specific routes. Step 8 aggregate-address address mask advertise-map map-name Example:
Device(config-router)# aggregate-address 10.0.0.0 255.0.0.0 advertise-map map2 (Optional) Generates an aggregate based on conditions that are specified by the route map. Step 9 aggregate-address address mask attribute-map map-name Example: Device(config-router)# aggregate-address 10.0.0.0 255.0.0.0 attribute-map map3 (Optional) Generates an aggregate with attributes that are specified in the route map. Step 10 end Example: Device(config)# end Returns to privileged EXEC mode. Step 11 show ip bgp neighbors [advertised-routes] Example: Device# show ip bgp neighbors Verifies the configuration. Step 12 copy running-config startup-config Example:
Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. Configuring BGP 32