Displays routes that are permitted by the community lis show ip bgp community-list community-list-number [ exact-match ] Displays routes that are matched by the specified AS pa show ip bgp filter-list access-list-number Displays the routes with inconsistent originating autonom show ip bgp inconsistent-as Displays the routes that have an AS path that matches th regular expression entered on the command line. show ip bgp regexp regular-expression Displays the contents of the BGP routing table. show ip bgp Displays detailed information on the BGP and TCP con individual neighbors.
show ip bgp neighbors [ address ] Displays routes learned from a particular BGP neighbor show ip bgp neighbors [ address ] [ advertised-routes | dampened-routes | flap-statistics | paths regular-expression | received-routes | routes ] Displays all BGP paths in the database. show ip bgp paths Displays information about BGP peer groups. show ip bgp peer-group [ tag ] [ summary ] Displays the status of all BGP connections. show ip bgp summary The bgp log-neighbor changes command is enabled by default. It allows to log messages that are generated when a BGP neighbor resets, comes up, or goes down.
Feature History for Border Gateway Protocol This table provides release and related information for the features explained in this module. These features are available in all the releases subsequent to the one they were introduced in, unless noted otherwise. Configuring BGP Feature History for Border Gateway Protocol Release Feature Feature Information Cisco IOS XE Everest 16.5.1a Border Gateway Protocol The Border Gateway Protocol (BGP) is an exterior gateway protocol used to set up an interdomain routing system that guarantees the loop-free exchange of routing information between autonomous systems. Configuring BGP 57