(Optional) Configuring EtherChannel Extended Load-Balancing Configure EtherChannel extended load-balancing when you want to use a combination of load-balancing methods. To configure EtherChannel extended load-balancing, perform this procedure: Procedure Configuring EtherChannels (Optional) Configuring EtherChannel Extended Load-Balancing Command or Action Purpose • src-dst-ip—Specifies the source and destination host IP address. • src-dst-mac—Specifies the source and destination host MAC address. • src-dst-mixed-ip-port—Specifies the source and destination host IP address and TCP/UDP port. • src-dst-port—Specifies the source and destination TCP/UDP port.
• extended—Specifies extended load balance methods--combinations of source and destination methods beyond those available with the standard command. • src-ip—Specifies the source host IP address. • src-mac—Specifies the source MAC address of the incoming packet. • src-mixed-ip-port—Specifies the source host IP address and TCP/UDP port. • src-port—Specifies the source TCP/UDP port. Step 4 end Example: Device(config)# end Returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Configuring EtherChannels 18