cisco — Monitoring EtherChannel, Port Aggregation Protocol, and Link Aggregation Control Protocol Status

Monitoring EtherChannel, Port Aggregation Protocol, and Link Aggregation Control Protocol Status You can display EtherChannel, PAgP, and LACP status using the commands listed in this table. Table 5: Commands for Monitoring EtherChannel, PAgP, and LACP Status Configuring EtherChannels Monitoring EtherChannel, Port Aggregation Protocol, and Link Aggregation Control Protocol Status Command or Action Purpose Device> enable Step 2 port-channel channel-number persistent Example: Device# port-channel 1 persistent Converts the auto created EtherChannel into a manual one and allows you to add configuration on the EtherChannel. Step 3 show etherchannel summary Example:

Device# show etherchannel summary Displays the EtherChannel information. Command Description clear lacp { channel-group-number counters | counters } Clears LACP channel-group information and traffic counters. clear pagp { channel-group-number counters | counters } Clears PAgP channel-group information and traffic counters. show etherchannel [ channel-group-number { detail | load-balance | port | port-channel | protocol | summary }] [detail | load-balance | port | port-channel | protocol | auto | summary ] Displays EtherChannel information in a brief, detailed, and one-line summary form.

Also displays the load-balance or frame-distribution scheme, port, port-channel, protocol, and Auto-LAG information. show pagp [ channel-group-number ] { counters | internal | neighbor } Displays PAgP information such as traffic information, the internal PAgP configuration, and neighbor information. show pagp [ channel-group-number ] dual-active Displays the dual-active detection status. show lacp [ channel-group-number ] { counters | internal | neighbor | sys-id} Displays LACP information such as traffic information, the internal LACP configuration, and neighbor information. show running-config Verifies your configuration entries.

show etherchannel load-balance Displays the load balance or frame distribution scheme among ports in the port channel. Configuring EtherChannels 30