cisco — Feature History for EtherChannels

Device# port-channel 1 persistent Device# show etherchannel summary Switch# show etherchannel summary Flags: D - down P - bundled in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 U - in use f - failed to allocate aggregator M - not in use, minimum links not met u - unsuitable for bundling w - waiting to be aggregated d - default port A - formed by Auto LAG Number of channel-groups in use: 1 Number of aggregators:

1 Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(SU) LACP Gi1/0/45(P) Gi2/0/21(P) Gi3/0/21(P) Additional References for EtherChannels Related Documents Feature History for EtherChannels This table provides release and related information for features explained in this module. These features are available on all releases subsequent to the one they were introduced in, unless noted otherwise. Configuring EtherChannels Additional References for EtherChannels Related Topic Document Title For complete syntax and usage information for the commands used in this chapter.

See the Layer 2/3 Commands section of theCommand Reference (Catalyst 9300 Series Switches) Release Feature Feature Information Cisco IOS XE Everest 16.5.1a EtherChannels EtherChannel provides fault-tolerant high-speed links between switches, routers, and servers. Cisco IOS XE Amsterdam 17.3.1 LACP 1:1 Redundancy and Dampening The LACP 1:1 Redundancy feature supports an EtherChannel configuration with one active link and fast switchover to a hot-standby link. The LACP 1:1 Hot Standby Dampening feature configures a timer that delays switchover back to the higher priority port after it becomes active.

Cisco IOS XE Dublin 17.10.1 Standalone Mode on Layer 3 Etherchannels Support for configuring Standalone mode or Independent mode on Layer 3 EtherChannels was introduced in this release. Configuring EtherChannels 34