Origin incomplete, metric 0, localpref 100, valid, internal, best EVPN ESI: 00000000000000000000, Gateway Address: 0.0.0.0, VNI Label 50901, MPLS VPN Label 0 Extended Community: RT:1:1 ENCAP:8 Router MAC:0C75.BD67.EF48 rx pathid: 0, tx pathid: 0x0 net: 0x7F54CC95FAB8, path: 0x7F54CCA542F8, pathext: 0x7F54CC9707B0 flags: net: 0x0, path: 0x3, pathext: 0x81 Updated on May 21 2020 13:54:20 UTC The following example shows the output for the show bgp l2vpn evpn route-type command for route type 2 on spine switch: Spine_switch# show bgp l2vpn evpn route-type 2 0 44d3ca286cc1 10.1.101.2 BGP routing table entry for [2][172.16.254.4:101][0][48][44D3CA286CC1][32][10.1.101.2]/24, version 24 Paths:
(1 available, best #1, table EVPN-BGP-Table) Advertised to update-groups: 1 Refresh Epoch 1 Local, (Received from a RR-client) 172.16.254.4 (metric 2) (via default) from 172.16.255.4 (172.16.255.4) Origin incomplete, metric 0, localpref 100, valid, internal, best EVPN ESI: 00000000000000000000, Label1 10101, Label2 50901 Extended Community: RT:1:1 RT:65001:101 ENCAP:8 Router MAC:7C21.0DBD.9548 rx pathid: 0, tx pathid: 0x0 net: 0x7F54CC95F958, path: 0x7F54CCA54220, pathext: 0x7F54CC970750 flags: net: 0x0, path: 0x3, pathext:
0x81 Updated on May 21 2020 13:58:41 UTC PE Device 1 The following example shows the output for the show bgp vpnv4 unicast all command on PE device 1 for the IP address of host device 1: PE_device_1# show bgp vpnv4 unicast all 10.1.255.103/32 BGP routing table entry for 1:1:10.1.101.2/32, version 14 Paths: (1 available, best #1, table green) Advertised to update-groups: 1 Refresh Epoch 1 65001 172.16.255.6 (via default) from 172.16.255.6 (172.16.255.6) Origin incomplete, localpref 100, valid, external, best Extended Community: RT:1:1 ENCAP:8 Router MAC:7C21.0DBD.9548 mpls labels in/out 22/16 rx pathid: 0, tx pathid:
0x0 Updated on May 21 2020 05:57:06 UTC The following example shows the output for the show ip route vrf command on PE device 1: PE_device_1# show ip route vrf green Routing Table: green Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 Configuring EVPN VXLAN External Connectivity Example: Enabling Layer 3 External Connectivity with MPLS Layer 3 VPN through eBGP Configuring EVPN VXLAN External Connectivity 40