cisco — Verifying EVPN VXLAN Layer 2 Overlay Network

Verifying EVPN VXLAN Layer 2 Overlay Network The following table lists the show commands that are used to verify a Layer 2 VXLAN overlay network: Table 1: Commands to Verify EVPN VXLAN Layer 2 Overlay Network Configuring EVPN VXLAN Layer 2 Overlay Network Verifying EVPN VXLAN Layer 2 Overlay Network Command or Action Purpose Step 9 neighbor {ip-address | group-name}update-source interface Example: Device(config-router)# neighbor 10.11.11.11 update-source Loopback0 Configures update source. Update source can be configured per neighbor or per peer-group. Use the IP address of the spine switch as the neighbor IP address. Step 10 address-family l2vpn evpn Example:

Device(config-router)# address-family l2vpn evpn Specifies the L2VPN address family and enters address family configuration mode. Step 11 neighbor ip-address activate Example: Device(config-router-af)# neighbor 10.11.11.11 activate Enables the exchange information from a BGP neighbor. Use the IP address of the spine switch as the neighbor IP address. Step 12 neighbor ip-address send-community [both | extended | standard] Example: Device(config-router-af)# neighbor 10.11.11.11 send-community both Specifies the communities attribute sent to a BGP neighbor. Use the IP address of the spine switch as the neighbor IP address. Step 13 exit-address-family Example:

Device(config-router-af)# exit-address-family Exits address family configuration mode and returns to router configuration mode. Step 14 end Example: Device(config-router)# end Returns to privileged EXEC mode. Command Purpose show l2vpn evpn evi [detail] Displays detailed information for a particular EVPN instance or all EVPN instances. show l2vpn evpn mac [detail] Displays the MAC address database for Layer 2 EVPN. show l2vpn evpn mac ip [detail] Displays the IP address database for Layer 2 EVPN. Configuring EVPN VXLAN Layer 2 Overlay Network 13