cisco — Example: Configuring Layer 2 VNI with Back-to-Back Multicast Replication

x - VxLAN group, c - PFP-SA cache created entry, * - determined by Assert, # - iif-starg configured on rpf intf, e - encap-helper tunnel flag Outgoing interface flags: H - Hardware switched, A - Assert winner, p - PIM Join Timers: Uptime/Expires Interface state: Interface, Next-Hop or VCD, State/Mode (*, 224.0.1.40), 00:46:14/00:03:14, RP 172.16.255.1, flags: SJCL Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list: TenGigabitEthernet1/1/1, Forward/Sparse, 00:43:31/00:03:14 Loopback0, Forward/Sparse, 00:46:14/00:02:42 (*, 225.0.0.101), 00:46:14/stopped, RP 172.16.255.1, flags: SJCFx Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list:

TenGigabitEthernet1/1/1, Forward/Sparse, 00:43:31/00:03:17 Tunnel0, Forward/Sparse-Dense, 00:46:14/00:01:47 (172.16.254.1, 225.0.0.101), 00:00:00/00:02:59, flags: FTx Incoming interface: Loopback1, RPF nbr 0.0.0.0 Outgoing interface list: TenGigabitEthernet1/1/1, Forward/Sparse, 00:00:00/00:03:29 (172.16.254.2, 225.0.0.101), 00:00:03/00:02:56, flags: x Incoming interface: TenGigabitEthernet1/1/1, RPF nbr 172.16.12.2 Outgoing interface list: Tunnel0, Forward/Sparse-Dense, 00:00:03/00:02:56 Leaf-01# The following example shows the output for the show ip mfib command on VTEP 1: Leaf-01# show ip mfib Entry Flags:

C - Directly Connected, S - Signal, IA - Inherit A flag, ET - Data Rate Exceeds Threshold, K - Keepalive DDE - Data Driven Event, HW - Hardware Installed ME - MoFRR ECMP entry, MNE - MoFRR Non-ECMP entry, MP - MFIB MoFRR Primary, RP - MRIB MoFRR Primary, P - MoFRR Primary MS - MoFRR Entry in Sync, MC - MoFRR entry in MoFRR Client, e - Encap helper tunnel flag. I/O Item Flags: IC - Internal Copy, NP - Not platform switched, NS - Negate Signalling, SP - Signal Present, A - Accept, F - Forward, RA - MRIB Accept, RF - MRIB Forward, MA - MFIB Accept, A2 - Accept backup, RA2 - MRIB Accept backup, MA2 - MFIB Accept backup Forwarding Counts:

Pkt Count/Pkts per second/Avg Pkt Size/Kbits per second Other counts: Total/RPF failed/Other drops I/O Item Counts: HW Pkt Count/FS Pkt Count/PS Pkt Count Egress Rate in pps Default (*,224.0.0.0/4) Flags: C HW SW Forwarding: 0/0/0/0, Other: 0/0/0 HW Forwarding: 0/0/0/0, Other: 0/0/0 (*,224.0.1.40) Flags: C HW SW Forwarding: 0/0/0/0, Other: 0/0/0 HW Forwarding: 0/0/0/0, Other: 0/0/0 Tunnel2 Flags: A TenGigabitEthernet1/1/1 Flags: F NS Pkts: 0/0/0 Rate: 0 pps Loopback0 Flags: F IC NS Pkts: 0/0/0 Rate: 0 pps (*,225.0.0.101) Flags: C HW Configuring EVPN VXLAN Layer 2 Overlay Network Example:

Configuring Layer 2 VNI with Back-to-Back Multicast Replication Configuring EVPN VXLAN Layer 2 Overlay Network 19