Flood List Information : Olist: 1125, Ports: 2 Port Information : BD_PORT Gi1/0/10:101 VXLAN_REP PL:25(1) T:VXLAN_REP [IR]10101:172.16.254.2 Unicast Address table information : 44d3.ca28.6cc2 VXLAN_UC PL:24(1) T:VXLAN_UC [MAC]10101:172.16.254.2 IP Multicast Prefix table information : Source: *, Group: 224.0.0.0/24, IIF: Null, Adjacency: Olist: 1125, Ports: 2 Source: *, Group: 224.0.1.39, IIF: Null, Adjacency: Olist: 1125, Ports: 2 Source: *, Group: 224.0.1.40, IIF: Null, Adjacency: Olist: 1125, Ports: 2 Leaf-01# Return to Verifying the Layer 2 VNI with Back-to-Back Multicast Replication, on page 17 .
Outputs to Verify the Configuration on VTEP 2 The following example shows the output for the show nve peers command on VTEP 2: Leaf-02# show nve peers Interface VNI Type Peer-IP RMAC/Num_RTs eVNI state flags UP time nve1 10101 L2CP 172.16.254.1 3 10101 UP N/A 00:35:22 Leaf-02# The following example shows the output for the show bgp l2vpn evpn summary command on VTEP 2:
Leaf-02# show bgp l2vpn evpn summary BGP router identifier 172.16.255.2, local AS number 65001 BGP table version is 34, main routing table version 34 9 network entries using 3456 bytes of memory 9 path entries using 1908 bytes of memory 4/4 BGP path/bestpath attribute entries using 1152 bytes of memory 1 BGP extended community entries using 40 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 6556 total bytes of memory BGP activity 13/4 prefixes, 23/14 paths, scan interval 60 secs 9 networks peaked at 12:32:49 Oct 26 2020 UTC (00:34:55.476 ago) Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 172.16.255.1 4 65001 215 213 34 0 0 03:06:35 3 Leaf-02# The following example shows the output for the show bgp l2vpn evpn command on VTEP 2:
Leaf-02# show bgp l2vpn evpn BGP table version is 34, local router ID is 172.16.255.2 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, t secondary path, L long-lived-stale, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Configuring EVPN VXLAN Layer 2 Overlay Network Example: Configuring Layer 2 VNI with Back to Back Ingress Replication Configuring EVPN VXLAN Layer 2 Overlay Network 27